What Everyone Ought To Know About The Dremel 4000!

Dremel 4000 Review

How To Buy Reconditioned Power Tools

Buying good woodworking power tools can get really expensive especially when you are just starting out and have a tight budget. If you are money strapped because you can't afford the best new brands on the market I have the solution for you...reconditioned power tools.

What's A Reconditioned Power Tool?

Reconditioned power tools or factory reconditioned tools are those that have been sold at retail, used by a customer and then returned to the manufacturer. Then the tool goes through a process of reconditioning, cleaning and repairing, and then put back on the market for resale. In most cases a certified technician will make sure the tool is working properly before returning it to market. Once these reach the market again they can be purchased for a fraction of what the new tool would of cost.

It is not unusual for manufacturers to offer a one year warranty on these used tools and some come with a thirty day money back guarantee. You end up getting a great tool with a good warranty for way less than you would have paid originally.

The disadvantage to purchasing reconditioned power tools is that not all of the items in a power tool line will be available and sometimes you will buy a lemon but if they offer a good warranty then this should be no problem.

I am finding that most manufacturers offer reconditioned items for just about every tool they make. Some companies you may want to look at are:

Milwaukee
Makita
Bosch
Ryobi
Bostitch
Dremel

Want to know if the tool is any good before you purchase it? Here is my research method:

1. Head on over to Amazon.com and select the "Tools and Home Improvement" category.

2. In the search box type "reconditioned power tools" and click "Go". You can also type in a specific tool like "reconditioned circular saw" and get specific results.

3. Next, on the right side of the page you will see another box labeled "Sort by". In the drop down menu select "Bestselling".

4. Under each product you should see some gold stars. If they are there that means someone has written a review for that product. Click on those gold stars and read the reviews. This will give you a good idea of what other people think who have already purchased the product.

I use this method often when I want to purchase a product. It is also best to read 8 to 10 reviews of that particular product. The more reviews the better.

Reconditioned power tools will save you a bunch of money and by using the research method I described you can save time on shopping.

Dremel Tool - Three Advantages of the Dremel 4000 Rotary Kit

This article will examine the best quality Dremel tool available on the market and 3 advantages that the Dremel 4000 rotary model has that no other system provides. It's not only light-weight and user-friendly, however it's greatly improved in design and it's compatible with the rest of the Dremel extras and parts that you may possibly already make use of. If you are searching for the rotary kit find out below exactly what this specific rotary tool provides and how this deviates from other tool which you have seen.

1. Varying Speed: The Dremel 4000 rotary system carries with it an improved upon motor and can range from 5,000 to 35,000 Revolutions per minute while retaining an even and continuous speed no matter what you are using it for. It features a varied speed slide that allows you to effortlessly alter your speed while operating; even while remaining consistent and accurate in your work. Along with the on/off switch is positioned perfectly as to not interfere with your grasp whilst working.

2. Adaptive: It truly is great for carving, routing, engraving, grinding, cutting, cleaning, sanding, polishing and more. Being the only rotary device compatible with the various Dremel extras and attachments out there, for example the MultiSaw and Planer add-ons that were designed for the 400 Series makes this tool is among the best versions available.

3. Fully Loaded: This particular kit is included with 50 accessories, six attachments a starter book and even a storage case. Some of these accessories incorporate 2 high-speed blades, 4 emery cut-off wheels, 3 sanding discs and also an engraving cutter. It's supported with a (blank) 12 months warrantee and will let you do a variety of tasks, from polishing beads and gemstones, to sharpening your lawnmower blade.

The above mentined post mentioned a Dremel tool which is unlike any that can be purchased. Offering varied speeds from 5,000 to 35,000 and the flexibility to complete almost any task you can imagine the Dremel 4000 rotary kit comes completely loaded with 50 add-ons, 6 attachments, a storage case and even a quick start help guide to help you.

For people that wish to carve, engrave, sand, polish and much more this is an impressive device to look at. And it provides the great bonus of operating with every other attachment and accessory that you might already possess.

The right way to Trim the Dog's Nails With a Dremel 300

Stuff You’ll Need to have Handy:

Dremel 300, Silver Nitrate Blood Coagulator

1: Show your pet the Dremel 300 with the tool turned off. Put it on to the floor in front of the dog or hold it inside your hand and let the dog approach it. Let your dog to smell the tool.

2: Turn on the Dremel 300 and let your dog listen to the sound. After that offer the Dremel 300 up to the pads of one of your dog's paws so he can feel the vibration the tool makes. Keep the spinning bit of the tool away from the paw during this introduction. Hold the handle against your dog's paw for a few minutes until your dog seems to calm down and becomes familiar with it. Give your dog a treat so it can form positive associations with getting its nails trimmed.

3: Hold the dog firmly, or get a friend to help you do this. It is best to use a dog lead and tie it somewhere secure, alternatively your friend can hold it. Just make sure that the dog is secure. Put the Dremel 300 bit you have selected for your dog's manicure on the spinning part of the Dremel 300. You will know it is correctly attached when you feel it snap into place.

4: You will need to inspect each of the dogs claws prior to trimming them. If your dog has light-colored nails, you will be able to see the pink nerve and blood supply inside the translucent nail, called the quick. Conversely if your dog has dark nails it will not be so obvious. If your dog has got dark nails you will not be able to see them so you will have to work in very short bursts so as not to cut the quick. Note if you do cut into the quick the nail will bleed and it will probably hurt the animal too.

5: Hold your dog's paw in your hand and press lightly on top of one nail with your fingers to isolate the nail you are working on. Folllow this procedure to work slowly across each nail. Hold the paw securely but do not squeeze. If you are working on a long-haired dog, pull the hair back and away from the nail and work carefully to ensure that you will not catch in the Dremel 300 and injure your dog.

The Dremel 300 makes light work of this job.

6: Turn on the Dremel 300 and grind lightly against the tip of the nail. Always make sure that you keep the dremel 300 moving at all times in a light sweeping movement so that you do not remove too much of the nail. Grind in short bursts up from the tip of the nail bringing just the tip shorter each time. Ideally the dog's nails will be cut to where they are even with the paws and do not touch the floor when the dog is standing. If your dog's nails are very long, it is not recommended to cut them too short in the first application and it is better to do it again in a week or so to get them to the preferred length. Each time you shorten the nail the quick will recede slightly, so you can trim the very tip of your dog's nails every other day and eventually you can bring them shorter than the length of the quick was originally without hurting the dog.

Helpful tips & Warnings

If you do manage to cut the nail quick, don't worry or panic. Accidents happen. Use silver nitrate products to stop the bleeding, widely available at pet stores.

This is just one of many ways to use The Dremel 300.

How to Build a Wooden Dog Crate For Your Pet Using A Dremel 4000 Rotary Tool

It is easy with a Dremel 4000

Using a Dremel 4000 to build a wooden dog crate is a great deal easier than having to be made using traditional tools. Crates made of wood are a lot sturdier and visually look so much better than the ones made with wire metals. They are also less expensive than with the metal ones. You can also use it as storage for your home items after the dog has outgrown his pen or crate.

Learn How Using Your Dremel 4000 Attachments.

If you want to make a wooden crate for your pet, follow the steps below in how to build a wooden dog crate using a Dremel 4000:

• Determine the size of the crate. This will depend on the size of your dog. If your dog is still a puppy, remember he won’t be a puppy for long so measure for the full size of your dog breed, with enough room for his food bowls and toys. You don’t want to makes your dog feel like a prisoner so ensure there is enough room for him to move around comfortably .

• Think of the height too as you want to make sure that your dog has enough head room too.

• Roughly sketch out your design on some paper and apply your measurements to scale if possible as this will allow you to see it more realistically.

• If you have used cardboard as your template material you can use the cutting attachment on your dremel 4000 to accurately cut the template.

• Attach the saw cutting blade to your rotary tool and cut the wood according to the size that you measured. You can use ply wood for this. If your measurements are 24 x 32 inches, then make it into 25 ½ by 33 ½ inches. Again, this will give your dog the extra space required in the pen. Also, you will need extra space to nail into so this can be used for that.

• Hold the dremel 4000 firmly to the marked area on you wood and using a very slow forward movement allow the rotary tool to cut the wood at it’s own pace. Do not try and force it.

• When all of your pieces are cut out, you can start attaching the boards and the end pieces together. Nail the plywood through the pine and then into the plywood for about one nail per 4”. If you find that some of the wood is not a perfect fit, change to the sanding attachment on the dremel 4000 and sand down the incorrect pieces.

• Using a measuring device, measure the spaces between the pine boards with the side pieces. The pieces should fit perfectly.

• Now, you can attach the base of the crate with the end pieces. If you need extra help for this, you might want to ask some assistance from a friend. You will need someone to hold the crate while you are attaching the base of it. Nail into the plywood and around the pine boards.

• Attach the back and front pieces. Again if there are areas that sit proud use your dremel 4000 to smooth them off.

• After that, you can attach the hinges for the doors of the crate. Change the Dremel 4000 attachment to the appropriate screw head type and use to fit the screws. Again, make sure that the door will be wide enough for your dog to come in and out of the crate.

Finally go around all the corners with your dremel 4000 rotary tool to smooth off any rough edges.

How The Dremel 4000 Rotary Tool Will Make DIY Jobs Easy

DIY Jobs Are Easy With A Dremel 4000 Rotary Tool

Having owned a dremel 4000 rotary tool in the past I have to say it really has saved me time and effort. You can tell the Dremel 4000 rotary tool was designed with it's users in mind. It's top quality, complete versatility and affordable price make it a resource that is going to be hard for rivals to compete with.

The Dremel 4000 Rotary Tool Essential Features

from Dremel.com

• High-performance motor for optimum effectiveness at all speeds

• Electronic feedback for constant speed under load

• Varied speed delivers optimum control and detail

• Different on/off switch and speed control dial for the optimal speed all the time

• Can be utilized with all of Dremel attachments, rotary tool bits and accessories

• Quick collet lock for fast accessory changes

• Cool-running ball bearing construction for smooth and quiet operation

• Replaceable motor brushes extend tool life

Technical Specs Of The Dremel 4000 Rotary Tool

from Dremel.com

• Amperage 1.6 amps

• Cord Length 6 ft.

• Speed Variable (5,000 to 35,000 RPM)

• Voltage 120 AC, 50-60 Hz

• Weight 18.8 oz

What I Liked About The Dremel 4000 Rotary Tool

It's versatility. Having owned a dremel rotary tool before, all of the attachments from my previous model worked with my new dremel 4000 rotary tool. So if you've owned a Dremel in the past, you can use those same bits and rotary tool accessories with this one.

With an easy to use variable speed control you can take the tool from 5000 - 35000 rpm as slowly as you like.

Unlike the bulky case for the Dremel XPR, the Dremel 4000 rotary tool case is a flat, briefcase type with the little toolbox for the dremel accessories stored securely inside.

Some Negatives About The Dremel 4000 Rotary Tool

Although it's advertised as having a slim, ergonomic body, this tool is actually bigger than previous Dremels. The reason for this is that they had to include a cooling system as well as a circuits that control the speed feedback into the handle which made it bigger. However, it's still small enough to hold comfortably. Should you be getting one to allow you to do detailed work, I would suggest also getting the flex shaft attachment, which will allow you to get into the smallest of spaces.

Ways to use your Dremel 4000 Rotary Tool

These include:

• Sanding wood (We used the planer accessory to shave wood off our door when it got stuck)

• Polishing wood, metal and stones using the rotary tool polishers.

• Engraving/etching metal, plastic or glass (this requires lots of practice)

• Drilling straight into wood, plastic material as well as metal

• Cutting through wood, metal, plastic or tile

• Grinding wood or metal

• Cleaning rust off objects (It was the only thing that took the rust off my sinks)

• Cutting your dogs toenails

• Carve a pumpkin

• Routing wood

Many Many more uses can be obtained using the dremel 4000 rotary tool. Just don't forget, in spite of how you use it, it is recommended to adhere to one principle.


You only need a small amount of pressure. Have the speed perform the work and you will have far better results and your dremel 4000 rotary tool will last longer.